S10

The S10 is a 2-way, full range line array cabinet containing 2x ND10-LM Kevlar® Neodymium drivers (2x 16 Ω) and an NH4TA2 1.5” exit compression driver (8 Ω). The critically optimized sound chamber produces a slightly curved wavefront with a nominal dispersion pattern of 110° x 10° (H x V). The chamber’s efficiency allows for increased vertical dispersion without sacrificing high frequency presence in the far field. Patent-pending Controlled Summation Technology further eliminates low-mid lobing normally associated with 2-way line source systems.

The cabinet construction uses marine grade birch plywood as well as aircraft grade steel and aluminum, and is equipped with two Speakon™ NL8 connectors. The rigging system incorporates the best aspects of previous advancements in our new SlideLock rigging technology.

The S10 is suited to a wide variety of applications. Its full range capability (60 Hz) at reasonable levels qualifies for applications where sub is not required. Increased vertical coverage (10°) enables the S10 to cover theaters, arenas and stadiums with reasonable speaker quantity. Other target applications include dance clubs, medium size festivals, corporate events and contemporary churches.

Frequency Range (+/-3 dB) 60 Hz - 18 kHz
Nominal Directivity (-6 dB) H x V 110° x 10°
Maximum Peak SPL** 141.3 dB
Components LF 2x ND10-LM 10" Kevlar® Neodymium Driver
Components HF 1x NH4TA2 4" Diaphragm / 1.5" Exit Compression Driver
Nominal Impedance LF 2x 16Ω(8Ω)
Nominal Impedance HF
Power Handling (AES / Peak) LF 2x 350 / 2x 1400 W
Power Handling (AES / Peak) HF 160 / 640 W
Rigging

Slidelock Rigging System

Connection 2x Speakon™ NL8
Height Front (mm / in) 265 / 10.4
Height Back (mm / in) 178 / 7
Width (mm / in) 737 / 29
Depth (mm / in) 526 / 20.7
Weight (kg / lbs) 27 / 59.6
Supported Processing Lake

**12 dB crest factor pink noise at 1m, free field, using specified processing and amplification

S10 Sub-Compact Support Frame (930-0020) Support frame for S10, CS10, S10n, CS10n, S119 & CS119 enclosures
S10 Extended Beam (930-0021) Accommodates greater array articulation
S10 Moving Point Extended Beam (930-0033) Extension beam with continuously adjustable pick point
S10 Line Array H-Clamp (932-0047) Horizontal articulator clamp to be used with S-Series/CS-Series/IS-Series line array rigging frames (max load: 200 kg)
S10 Extended Lifting Plates (932-0043) Lifting plates with fine resolution pick points for single point hangs (2 per set)
S10 Sub-Compact Line Array Dolly (938-0019) Transports up to 4x S10, CS10, S10n, CS10n enclosures.
S10 Dolly Stacking Legs (938-0014) The Dolly Stacking Legs allow for your E-Series, S10, S10n, CS10 or CS10n system to be ground stacked without leaving the Dolly. As the Dolly naturally sits in a downward angle, the stacking legs allow you to elevate your stack to an angle which perfectly suits your particular application.
S10 Sub-Compact Line Array Cover 4up (907-0026) Cover for 4x S10, CS10, S10n or CS10n stacked on a Sub-Compact Line Array Dolly (part no. 938-0019)
S10 Sub-Compact Line Array Flight Case (901-0003) Road-ready Flight Case for 4x S10, CS10, S10n or CS10n. 31.25" x 25" x 50"
S10 Sub-Compact Underhang Adapter Kit (931-0010) Suspends S10/S10n/CS10/CS10n enclosures with the use of the Sub-Compact Support Frame (part no. 930-0020) from E-Series 3-way line source enclosures
S10 Spec Sheet One page spec sheet for the S10 n/a
S10 User Manual Comprehensive User Manual for the S10 n/a
S-Series User Manual Product and Rigging Manual for the S10 & S119 n/a
S-Series Configuration Brochure A document outlining the factory recommended configurations for the S-Series n/a
3D CAD Drawings 3D CAD Drawings of all S-Series enclosures n/a
ADAMSON EASE Data V16 Complete GLL library for all Adamson products n/a
Adamson Amplification Chart V5.3 Displays the maximum amount of Adamson loudspeakers that can be used with approved amplifiers. n/a
Adamson Load Library V5.4 Adamson's updated preset library - Requires Lake Controller 7.0.0 or higher n/a
S10
S10
S10

WANT TO WORK WITH ADAMSON PRODUCTS?

Get in Touch