IS7px

The IS7px is a passive 2-way, full range point source cabinet containing 2x ND7-LM16 Low-Mid drivers and an NH3-8 1.4” exit compression driver with a passive crossover, resulting in a nominal impedance of 6 Ω. The prolate spheroidal waveguide produces a nominal dispersion pattern of 70° x 40° or 100° x 50° (H x V), rotatable by 90° increments..  The design of the waveguide ensures equal tonal balance when moving outside of the intended coverage pattern, delivering natural sound with no diffraction or lobing. 

The cabinet construction uses marine grade birch plywood as well as aircraft grade aluminum and steel, and is equipped with two Speakon™ NL4 connectors (IS7px), or barrier strips (IS7pbx). A plate and screw rigging system is placed on four faces of the enclosure, with a multitude of accessories allowing the enclosure to be deployed seamlessly in a variety of applications.

The IS7px is suited to a wide variety of applications. Its full range capability (80 Hz) at reasonable levels qualifies for applications where sub is not required. The choice in dispersion pattern enables the IS7px to supplement larger systems as a fill cabinet, or to handle smaller applications on its own. Other target applications include performing arts centers, live performance venues, sports venues, conference centers and houses of worship.

Frequency Range (+/-3 dB) 80 Hz - 18 kHz
Nominal Directivity (-6 dB) H x V 70° x 40° or 100° x 50° Rotatable
Maximum Peak SPL** 135
Components LF 2 X ND7-LM16
Components HF Adamson NH3-8 3” Diaphragm / 1.4” Exit Compression Driver
Nominal Impedance Passive 6 Ω
Power Handling (AES / Peak) Passive 500 / 2000 W
Rigging

Integrated Rigging System

Connection 2x Speakon™ NL4 or Barrier Strips / IP67 Cable Gland with Weatherized
Height Front (mm / in) 527 / 20.75
Width (mm / in) 251.5 / 9.9
Depth (mm / in) 356 / 14
Weight (kg / lbs) 15.5 / 34.2
Supported Processing Lake

**12 dB crest factor pink noise at 1m, free field, using specified processing and amplification

IS7px IS7p Horizontal Bracket (934-0027) IS7p horizontal yoke
IS7px IS7p Vertical Bracket (934-0028) IS7p vertical yoke
IS7px IS-Series Tilt Adapter (932-0042) Adapter bar with multiple tilt angles for IS-Series Horizontal and Vertical Brackets (934-0027, 934-0028, 934-0029, 934-0030)
IS7px IS7p Short Fill Plate (930-0032) Very low profile surface mount plates to affix to the IS7p (set of 2)
IS7px IS7p & IS10p Fill Plate (930-0031) Low profile surface mount plates to affix to the IS7p / IS10p (set of 2)
IS7px IS-Series Sight Mount (934-0026) Circular disk with multiple angle bar for IS10p / IS7p
IS7px IS-Series Super Sight Mount (934-0031) Lifting hardware to attach IS10p or IS7p Horizontal Brackets
IS7px IS-Series Articulator (934-0032) Multiple angle articulator to attach 2x IS10p or IS7p Horizontal Brackets
IS7px IS-Series C-Clamp (932-0040) Beam clamp for IS10p / IS7p, mounts directly to enclosure with 90 degree angle increments (max load: 200 kg)
IS7px IS-Series Point H-Clamp (932-0041) Beam clamp for IS10p / IS7p, mounts directly to enclosure with 5 degree angle increments (max load: 200 kg)
IS7px IS-Series Pole Mount Adapter (932-0039) Circular disk with polemount cup to fit standard speaker stand, used with IS10p / IS7p
IS7px Spec Sheet One page spec sheet for the IS7px n/a
IS7px User Manual Operation Manual for the IS7px n/a
IS-Series Brochure Product brochure for Adamson's IS-Series n/a
Sketchup Library Sketchup Models of all IS-Series enclosures and rigging accessories 76.07 MB
3D CAD Drawings 3D CAD drawings of all IS-Series Point enclosures and rigging accessories n/a
Revit Model Library Revit Models of the IS7px enclosure and accessories n/a
Adamson Amplification Chart V5.3 Displays the maximum amount of Adamson loudspeakers that can be used with approved amplifiers. n/a
Adamson Load Library V5.4 Adamson's updated preset library - Requires Lake Controller 7.0.0 or higher n/a
ADAMSON EASE Data V16 Complete GLL library for all Adamson products n/a
IS7px

WANT TO WORK WITH ADAMSON PRODUCTS?

Get in Touch