The CS10n is a two-way, full-range intelligent loudspeaker, intended for use in a wide variety of applications. Utilizing Adamson’s proprietary network platform, the CS10n employs a redundant MILAN scheme with the ability to daisy-chain networked audio between multiple sources, an analog XLR input and output, as well as on-board DSP and amplification. All features of the loudspeaker are controlled and monitored through Adamson’s proprietary CS software.

Acoustically, the CS10n contains 2x 10-inch Kevlar® Neodymium transducers and a 4” compression driver. The critically optimized sound chamber produces a slightly curved wavefront with a nominal dispersion pattern of 80° x 10° (H x V). The narrower horizontal pattern allows for increased usability in reflective spaces as well as increased long-throw capability of a CS-Series package.

The cabinet construction uses marine grade birch plywood as well as aircraft grade steel and aluminum, and is equipped with a male and female XLR connector, 2x etherCON connections and an in and through powerCON TRUE1 connection.

Please refer to the CS10n User Manual for further information.

Frequency Range (+/-3 dB) 60 Hz - 18 kHz
Nominal Directivity (-6 dB) H x V 80° x 10°
Maximum Peak SPL** 141.3 dB
Components LF 2x ND10-LM 10” Kevlar® Neodymium Driver
Components HF Adamson NH4 4” Diaphragm / 1.5” Exit Compression Driver

Slidelock Rigging System

Connection Power: powerCON TRUE1 Network: 2x etherCON Analog: 2x XLR
Height Front (mm / in) 265 / 10.4
Height Back (mm / in) 178 / 7
Width (mm / in) 737 / 29
Depth (mm / in) 526 / 20.7
Weight (kg / lbs) 31 / 68.4
Amplification 2 channel Class-D, 2400 W total output
Input Voltage 100 - 240 V
Current Draw 0.45 A rms idle, 1.7 A rms long-term, 10 A max peak
CS10n Sub-Compact Support Frame (930-0020) Support frame for CS10, S10, CS10n, S10n, CS119 & S119 enclosures
CS10n Extended Beam (930-0021) Accommodates greater array articulation
CS10n Moving Point Extended Beam (930-0033) Extension beam with continuously adjustable pick point
CS10n Line Array H-Clamp (932-0047) Horizontal articulator clamp to be used with CS-Series/S-Series/IS-Series line array rigging frames (max load: 200 kg)
CS10n Extended Lifting Plates (932-0043) Lifting plates with fine resolution pick points for single point hangs (2 per set)
CS10n Sub-Compact Line Array Dolly (938-0019) Transports up to 4x CS10, S10, CS10n, S10n enclosures.
CS10n Dolly Stacking Legs (938-0014) The Dolly Stacking Legs allow for your E-Series, CS10, CS10n, S10 or S10n system to be ground stacked without leaving the Dolly. As the Dolly naturally sits in a downward angle, the stacking legs allow you to elevate your stack to an angle which perfectly suits your particular application.
CS10n Sub-Compact Line Array Cover 4up (907-0026) Cover for 4x CS10, S10, CS10n or S10n stacked on a Sub-Compact Line Array Dolly (part no. 938-0019)
CS10n Sub-Compact Line Array Flight Case (901-0003) Road-ready Flight Case for 4x CS10, S10, CS10n or S10n. 31.25" x 25" x 50"
CS10n Sub-Compact Underhang Adapter Kit (931-0010) Suspends CS10/CS10n/S10/S10n enclosures with the use of the Sub-Compact Support Frame (part no. 930-0020) from E-Series 3-way line source enclosures
CS10n Spec Sheet One page spec sheet for the CS10n 443.92 KB
CS10n User Manual Comprehensive User Manual for the CS10n 3.35 MB
CS-Series Brochure Product brochure for Adamson's CS-Series 18.23 MB
ADAMSON EASE Data V16 Complete GLL library for all Adamson products n/a


Get in Touch